HEAT Insulation Boards

30-70mm EPS or Rockwool paste on 9,5-12,5-15-18mm Gypsum plasterboard or Fibercement Board, OUTWEAR, Aquapanel etc. Gypsum boards used for interrior walls and Fibercement board, OUTWEAR, Aquapanel etc. are used for exterior walls.

Rockwool fibers cut and glued vertically to the boards. 

Horizontal paste is also possible. The Boards has 60cm width and 250cm length and a thickness of 38-88mm. The higher lengths are possible.

Boards can be produced according to the type of installation. Installed by pasting on one or both sides of a wall.

By using Duvarmatik special silicone sealant, joints may be retained for many years without cracking. In addition, no need for the mesh band.

Content Image

SOUND Insulation Boards

You can reach the desired sound insulation values very quickly by using Duvarmatik Sound Insulation boards. 9.5 mm /12.5 mm / 15 mm or 18 mm gypsum board used with 4 mm / 6 mm / 8 mm / 10 mm / 12 mm special bonding material to cerate Duvarmatik Sound Insulation board.

60cm width x desired height and 13.5 mm / 26 mm thickness up to the project. The average frequency of 3000Hz approximately 40 db / 60 db sound insulation can provide. The boards glued on both sides of a wall By using Duvarmatik special silicone sealant, joints may be retained for many years without cracking. In addition, no need for the mesh band.

 

Content Image

FIRE Insulation Boards

8mm DRAGONBOARD used with 20-50mm Rockwool to create Fire Isnulation Boards. Rockwool fibers cut and glued vertically to the boards.

Horizontal paste is also possible. The Boards has 60cm width and 250cm length and a thickness of 38-88mm. The higher lengths are possible.

Boards can be produced according to the type of installation. Installed by pasting on one or both sides of a wall.

By using Duvarmatik special silicone sealant, joints may be retained for many years without cracking. In addition, no need for the mesh band.

Content Image